RV sewer valves like the Bristol # 34466NDHR19AAA that you referenced are the same valves used by many of the OEM's including, sometimes, Winnebago. We do not have the ability pull build sheets and know exactly what part was installed on your Winnebago Micro Minnie Travel Trailer, but you can look for identifying markings on the currently installed valve to compare. This RV sewer elbow combines (2) 3" waste valves and can be used as a replacement part or to upgrade your existing setup.... view full answer...
While we have replacement locks, we do not have the exact replacement keys for your original locks on your 2020 Winnebago Micro Minnie.
You still have the option to replace or upgrade your current locks with our selections like the Global Link RV Entry Door Locking Latch Kit # 295-000002. It also depends on what locks will be replaced, so I attached our selection below. view full answer...
As long as the frame where a scissor jack like the etrailer.com # TJSC-24 has room to be mounted, there should be no issue replacing your current jacks. The base of the # TJSC-24 will measure 10-1/4" long by 3-1/4" wide, so as long as you have that kind of space you will be good to go.
However, it should be noted that this jack is designed to stabilize a portion of your trailer's weight and not to support the full weight of your trailer. Do not use this jack to lift your trailer or RV.... view full answer...
From what I've found on Winnebago's website, your Winnebago 1700bh Micro Minnie has a 3700 lb GVWR and is said to have a 4000 lb capacity axle which would use an L68149 inner and a L44649 outer wheel bearing.
I'd recommend checking the inner and outer wheel bearing cages to ensure those reference numbers are engraved on them. If you do indeed have the L68149 and L44649 bearings, you'll want to use the # BK2-100 bearing kit you'd looked at. The kit includes the inner and outer bearing,... view full answer...
It sounds like you're looking for just the handle and cable for the waste valve system on your 2021 Winnebago Micro Minnie Travel Trailer and for that we have options from Valterra with different cable lengths:
72" - # TC72PB
96" - # TC96PB
120" - # TC120PB
I don't know what exactly came on your trailer so you'll need to determine the cable length needed for your application. The good news is that you can trim the cable to whatever length you're needing so if one of these kits is slightly... view full answer...
All of the replacement support systems that we have are for manual applications so if you're needing to replace your electric arms then I recommend using one of the conversion kits. These come with 69" long arms and Black # LC434723 and White # LC434724 depending on what you're needing.
To make sure the longer length works you simply need to make sure you have 69" of unobstructed area from the awning rail straight down. I have attached a review video for you to check out. view full answer...
Unfortunately the Monitor WVOM541 for your WVHS541 has been discontinued and is no longer available. You will need to replace your entire camera and monitor with the Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR. The new monitor and camera uses a different communication method that is not compatible with the older camera. view full answer...
We can certainly point you in the right direction, although I do not have a way to look up exactly what model converter/charger you currently have in your 2017 Winnebago Micro Minnie. If you can provide the brand and model number of your current battery charger/converter I would be happy to confirm the correct replacement. For example if your current battery charger/converter is rated for 45 amps the Progressive Dynamics 9300 Series RV Converter Charger # PD69RR which is compatible with... view full answer...
Go To Results